Physical plant, mechanical plant or industrial plant (and where context is given, often just plant) refers to the necessary infrastructure used in operation and maintenance of a given facility. The operation of these facilities, or the department of an organization which does so, is called "plant operations" or facility management. Industrial plant should not be confused with "manufacturing plant" in the sense of "a factory". This is a holistic look at the architecture, design, equipment, and other peripheral systems linked with a plant required to operate or maintain it.
Power plants
Nuclear power
The design and equipment in a Nuclear Power Plant, has for the most part remained stagnant over the last 30 years There are three types of reactor cooling mechanisms: “Light water reactors, Liquid Metal Reactors and High Temperature Gas-Cooled Reactors”. While for the most part equipment remains the same, there have been some minimal modifications to existing reactors improving safety and efficiency. There have also been significant design changes for all these reactors. However, they remain theoretical and unimplemented. Nuclear power plant equipment can be separated into two categories: Primary systems and Balance-Of-Plant Systems. Primary systems are equipment involved in the production and safety of nuclear power. The reactor specifically has equipment such as, reactor vessels usually surrounding the core for protection, the reactor core which holds fuel rods. It also includes reactor cooling equipment consisting of liquid cooling loops, circulating coolant. These loops are usually separate systems each having at least one pump. Other equipment includes Steam generators and pressurizers that ensures pressure in the plant is adjusted as needed. Containment equipment is the physical structure built around the reactor to protect the surroundings from reactor failure. Lastly primary systems also include Emergency core cooling Equipment and Reactor protection Equipment. Balance-Of-Plant Systems are equipment used commonly across power plants in the production and distribution of power. They utilize; Turbines, Generators, Condensers, Feedwater equipment, auxiliary equipment, fire protection equipment, Emergency power supply equipment and used fuel storage.
Broadcast engineering
In broadcast engineering, the term transmitter plant is the part of the physical plant associated with the transmitter and its controls and inputs, the studio/transmitter link (if the radio studio is off-site), the radio antenna and radomes, feedline and desiccation/nitrogen system, broadcast tower and building, tower lighting, generator, and air conditioning. These are often monitored by an automatic transmission system, which reports conditions via telemetry (transmitter/studio link).
Telecommunication plants
Fiber optic telecommunications
Economic constraints such as capital and operating expenditure lead to Passive Optical Networks as the primary fiber optic model used to for connecting users to the fiber optic plant. A central office hub utilities transmission equipment, allowing it to send signals to between one and 32 users per line. The main fiber backbone of a PON network is called an optical line terminal. The operational requirements such as maintenance, equipment sharing efficiency, sharing of the actual fiber and potential need for future expansion, all determine which specific variant of PON is used. A Fiber Optic Splitter is equipment used when multiple users must be connected to the same backbone of fiber. EPON; a variant of PON, which can hold 704 connections in one line. Fibre networks based on a PON backbone have several options in connecting individuals to their network, such as fibre to the “curb/building/home”. This equipment utilises different wavelengths to send and receive data simultaneously and without interference
Cellular telecommunications
Base stations are a key component of mobile telecommunications infrastructure. They connect the end user to the main network. They have physical barriers protecting transition equipment and are placed on masts or on the roofs/sides of buildings. Where it is located is determined by the local radio frequency coverage that is required. These base stations utilize different kinds of antennas, either on buildings or on landscapes to transmit signals back and forth Directional antennas are used to direct signals in different direction, whereas line of sight radio-communication antennas, allow for communication in-between base stations.